Baja BA 250 Bedienungshandbuch PDF herunterladen (Seite 58)

Checking and Changing engine oil

Oil Filter Screen removal and cleaning

The engine oil should be checked before every ride and changed every 20 to

40 hours of operation. It should be changed more often in dirty and dusty

areas.

To check oil:

1. Park vehicle on level ground.

2. Check oil level on site gauge and/or dip stick.

If oil is low, add oil until Maximum level

is noted on dip stick and/or site gauge.

To change oil:

1. Remove oil dip stick cap.

2. Remove drain bolt under engine and drain oil into proper container.

3. Remove oil lter plug and oil lter screen located on bottom left side of

engine. Clean screen with solvent

4. Re-install oil drain bolt and oil lter plug.

5. Pour fresh oil of the specied type through the oil ll hole.

NOTE: Approximately 900ml (1 Qt) of oil is required.

6. Tighten oil cap, and check oil level on dip stick.

7. Dispose of used oil at a reclaim facility.

Oil Cap

and Dip Stick

Oil drain bolt

Maximum

Level

Minimum

Level

INSPECTION AND MAINTENANCE

Oil lter plug

Spring Oil lter screen

Site Gauge

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 81 82

Keine Kommentare

Baja BA 250 Bedienungshandbuch Seite 58